Raspberry Pi Pinout

Real-Time HAT

Real-Time HAT extends the Gigabit-Ethernet interface of the Raspberry Pi, adding professional networking functions. Typical applications are industrial real-time communication and network monitoring.

The HAT provides 3 Gigabit-Ethernet ports, one of which is connected to the Raspberry Pi's Ethernet port. Connection to the Raspberry Pi is realized via the GPIO connector and via a (short) Ethernet cable. The SPI0 interface is used for main configuration, using either CE0# or CE1#.

Additional information on use cases, programming interfaces etc. can be found on InnoRoute's website, which includes details on using the HAT as an endpoint in Time-Sensitive Networks, as a 3-port Ethernet switch, or to measure and monitor any kind of the traffic forwarded through the HAT.

To install the necessary software, use the following commands:

git clone https://github.com/InnoRoute/RealtimeHAT
cd RealtimeHAT


  • Prodotto da InnoRoute GmbH
  • Fattore di forma HAT
  • Prodotto ID EEPROM
  • Alimentazione a 5v+3.3V
  • Utilizza 13 GPIO pins
  • Utilizza SPI
  • Utilizza I2C
  • 0x50: I2C0 - ID EEPROM
  • 0x43: I2C1 - IO Expander
  • 0x24: I2C1 - PMIC
  • Maggiori informazioni
  • GitHub
Real-Time HAT